English
_51
MAIN MENU
Remote Devices
You can set the RS-485 communication for use of PTZ Camera with the DVR.
Using the mouse may help make setup easier.
1.
Use the up/down buttons (
) in <
Device
> window to
move to <
Remote Device
>, and press [
ENTER
] button.
2.
Use direction buttons (
◄ ►
) to move to the desired
item, and press [
ENTER
] button.
3.
Set the values of each communication setup of the remote
device.
•
Baudrate : Baud rate settings of the DVR, PTZ camera
should be matched for proper operations.
4.
Make sure to match IDs of the DVR and Remote Control,
and press <
OK
>.
M
For changing the remote control’s ID, refer to “
Changing the Remote Control ID
”. (Page 14)
Remote Control
ON
ID
0
Baudrate
Parity
Data
Stop Bit
Transfer type
9600
None
8
1
Half Duplex
Remote Device
OK
Cancel
