52_
main menu
main menu
Setting the PTZ
To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the <
Remote Devices
> settings. (Page 56)
Using the mouse may help make setup easier.
1.
Use the up/down buttons (
▲▼
) in <
Device
> window to
move to <
Camera
>, and press [
ENTER
] button.
2.
Select <
PTZ
>.
A window of PTZ settings appears.
3.
Use direction buttons (
▲▼_ +
) to move to a desired item,
and select i
t.
•
I
D : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote contro
l.
•
Protocol : Set the protocol of the connected camera of each
channel.
M
`
You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DV
R.
4.
W
hen the PTZ setup is done, press <
OK
>.
CH
ID
Protocol
1
0
>
None
2
1
>
None
3
2
>
None
4
3
>
None
5
4
>
None
6
5
>
None
7
6
>
None
8
7
>
None
Camera
PTZ
Camera
Previous/Next Page
OK
Cancel