English
_69
MAIN MENU
Mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M
If an event occurs with a channel where the camera’s video is set to <
OFF
> or the remaining recording count is set
to <
OFF
>, only the text notification will be sent to the applicable email address.
The e-mail receivers are not able to adjust the attached image quality.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1.
In the <
Network
> setting window, press the up/down
(
) button to move to <
Mailing Service
> and press the
[
ENTER
] button.
2.
Select <
SMTP
>.
You will see the SMTP setting window.
3.
Use direction buttons (
◄ ►
) to move to a desired item
and set the value.
•
ServerType : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <
Never
> and <
TLS(if Available)
>.
•
Sender : Use the virtual keyboard to enter the sender’s e-mail address.
Refer to “
Using Virtual Keyboard
”. (Page 35)
•
TEST : Conducts the test on the server settings.
4.
When the SMTP setting is done, press <
OK
>.
Mailing Service
SMTP
Event
OK
Cancel
Use Authentication
Group
Recipient
ServerType
SMTP mail Server
Server
Port
25
User
Password
Secure Transfer
Never
Sender
ex. user@example.net
TEST
Summary of Contents for SDS-P3040
Page 1: ...SDS P3040 4 CHANNEL DVR User Manual ...
Page 129: ......
