10
· Installation
Wirelessreceiver
Signalindicator
The signal indicator shows the strength of the signal being received from the
camera. The number of bars in the signal indicator shows the strength of the
signal – One or no bars indicate the signal is poor, and 4 bars indicate a strong
signal.
Cameranumber
Indicates the number of camera that is displayed on the current screen. Press
the [
M
] key on the receiver to switch between available cameras.
To automatically switch between channels, press the [
A
] key (AUTO).
For paring to add a camera, refer to “
Pairing
”. (Page 12)
n
`
`
Temperature
Shows the ambient temperature where the wireless camera is installed.
TriggerAlert
Indicates the type of alert when audio is detected on the camera.
Talk
Press and hold [
]on the monitor to talk back to the camera currently being
displayed on the LCD screen. Indicates that unit is on talking mode.
SEW-3035
Viewing Mode Display
nightlight
Press [ ] in the wireless receiver to remotely turn on/off the night light on the
wireless camera currently being displayed. An indicator light will be visible if on.
AutoMute
If you set Auto Mute to <
YeS
>, the applicable message appears on the screen.
MicroSdcardstatus
Indicates when a Micro SD card is inserted.
It indicates that micro SD card get full capacity when the icon is red,and card
has some spaces when icon is white.
It displays the recording type if you press REC [
A
] or REC [
M
] button.
FileList
Indicates if recording file exists.
To go to file list press [
] button.
A/Mrecord
Press to auto record or manual record during monitoring.
Only available when the Micro SD card is inserted.
REC [
A
] : Start recording when an alarm is detected.
REC [
M
] : Start recording when the button is pressed.
Volumeadjustment
The receiver volume can be adjusted by using the [
+
], [
–
] keys when viewing a
camera.
Press the [
–
] key to decrease the volume, and press the [
+
] key to increase the
volume. When the volume bar is disappear, the volume will be muted and no
sound will be emitted by the device.
The volume adjustment icon will be displayed during volume changes, and will
disappear after 5 seconds of inactivity.
Alarm
Indicates if the alarm set to <
on
>.
Time/ZooM
Displays the time that is set in the current receiver.
Displays zoom size if it sets x2.
noSignalWarnings
The "
ouToFrAnGe
" message means the receiver cannot access the camera.
Please reposition the camera, or check the camera power.
SEW-3035-ENGLISH.indd 10
2011-04-13 오후 5:37:31
