1 Specifications
S820/S850
1-2
8
.
Never push objects of any kind into this
product through the cabinet slots, as they may
touch dangerous voltage points or short out
parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.
9
.
If the product is dropped, the cabinet may be
damaged.
10.
Do not install or remove the detachable hard
disk drive with the system turned on.
11.
It indicates a need for service that the product
exhibits a distinct change in peformance.
12.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth and ISO-prophyl
alcohol for cleaning.
13.
This product should be operated from the type
of power source indicated on the marking label.
If you are not sure of the type of power
available, consult your dealer or local power
company.
14.
If an extension cord is used with this product,
make sure it is a 3-pronged, grounded cord
and that the total of the ampere ratings on the
products plugged into the extension cord do
not exceed the extension cord ampere rating.
Also, make sure that the total of all products
plugged into the wall outlet does not exceed 15
amperes.
15.
NiMH batteries must be recycled or disposed
of properly.
16.
Do not attempt to disassemble the battery. The
electrolyte contained within it is highly toxic
and might cause injury to skin or eyes.
17.
Charge the battery only as described in this
document.
18.
Do not short circuit the battery terminals as the
resulting high currents can damage the battery.
19.
The battery should not be used to power other
products.
20.
Do not dispose of a used battery in a fire or
incinerator.
21.
Do not subject the battery to extreme
temperature. Battery temperature should be
greater than -20°C(-4°F) and less than +50°C
(122°F).
22.
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
•
When the power cord or plug is damaged
or frayed.
•
If liquid has been spilled into the
product.
•
If the product does not operate normally
when the operating instructions are
followed. Adjust only those controls that
are covered by the operating instructions,
since improper adjustment of other
controls may result in damage.
