Samsung series 4 4000 User Manual Download

Page: 35 / 226

◀

▶

English

Using Edit Favorites to delete a channel from the Favorites List:

Select

Edit Favorites

, and then press the

ENTER

button. The

Edit

Favorite

screen appears.

The Favorite Group you assigned to that channel is checked. Select the

group, and then press

ENTER

. The check disappears.

Select

, press

ENTER

, and then press

ENTER

again.

Using Edit Favorite to move a channel from one Favorite Group to another:

Select

Edit Favorites

, and then press the

ENTER

button. The

Edit

Favorite

screen appears.

The Favorite Group you assigned to that channel is checked. Select the

group, and then press

ENTER

. The check disappears.

Use the Up or Down arrow key to highlight a different group, and then press

ENTER

. A check appears by the group’s name.

Select

, press

ENTER

, and then press

ENTER

again.

Summary of Contents for series 4 4000



































































































































































































































Search results

Summary of Contents for series 4 4000

Reviews:

Related manuals for series 4 4000

Brands by name

Popular brands

Samsung series 4 4000, User Manual

Search results

Summary of Contents for series 4 4000

Reviews:

Related manuals for series 4 4000

Brands by name

Popular brands