3
.24
Stand-alone Fax
5. Press
Start/Enter
when the name appears correctly or simply
without entering a name. The display asks you to select another
location.
6. To store more speed dial numbers, repeat steps 2 through 5.
Or,
To return to Standby mode, press
Stop
.
Editing a Number for Speed Dialling
1. Press and hold
Speed
(
#
) for 2 seconds.
2. Enter the 2-digit location number where the phone number you want
to edit has been stored, then press
Start/Enter
. The display shows
the number.
3. Press
➛
or
❿
to move the cursor to the desired number and edit the
number.
Note
: When you press the speed dial number stored for group dial, the
display briefly shows ‘G-REGISTERED’ to indicate that the number is
used for group dial, then you can edit the number.
4. When you have finished editing, press
Start/Enter
.
Sending a Fax Using a Speed Number
1. Load the document
face down
with the top edge first going into the
document feeder.
2. Press
Speed
(
#
), then enter a 2-digit speed dial location number.
3. Press
Start/Enter
to dial the number. The number will be
automatically dialled and the document transmitted when the remote
fax machine answers.
Sxx:05512637522
Summary of Contents for SF-530 Series
Page 100: ...Memo ...
