Installation
3-16
Samsung Electronics
3-11 Memory Clear
3-11-1 Memory Clear in User Mode
In the user mode, you can selectively clear
information stored in this machine's memory. The
list of data you can clear is as follows:
1:SYSTEM ID
: your terminal ID number and name
are erased from the machine's memory.
2:SYSTEM DATA
: restores user-selectable options
to the default value.
3:DIAL & DELAYED
: clears the One-Touch, Speed
Dial, or Group Dial numbers stored in memory.
In addition, all the delayed time operations you
have reserved are also canceled.
4:TX-RX JOURNAL
: clears all records of
transmissions & receptions.
1. If the machine is in the tech mode, return to the
user mode by pressing
MENU, #, 1, 9, 3, 4
in
sequence.
2. Press
MENU
, and the one-touch key 5
'
MEMORY CLEAR
'.
The LCD displays the type of memory you can
choose.
3. Scroll to the options by pressing
or
¹
until you
find the one you want to clear. When the cursor
blinks under the memory you want to clear, press
ENTER
.
Otherwise, you can enter the number of the
memory.
4. The LCD prompts you to confirm your selection.
Press
ENTER
. If you press
STOP
, the machine
returns to Standby Mode.
3-11-2 Memory Clear in Tech Mode
Memory clear, contained in the tech mode, is used
for clearing all the user's data in memory and setting
to default status.
1. If not in the tech mode, Press
MENU, #, 1, 9, 3, 4
in sequence to initiate the tech mode.
2. Press
MENU
, and the one-touch key 5
'
MEMORY CLEAR
'.
The LCD displays '
MEMORY ALL CLEAR
'.
3. Press
1
to clear all memory.
If you want to cancel, press
2
. The machine
returns to Standby Mode.
3-12-1 System Data Settings in User-mode
The fax machine has various user-selectable
functions. These functions are usually selected
during the initial setup of the machine, and there
should be little need to change them there after.
Note :
Before you begin, print out the system data
list to see the current settings. To print the system
data list, press
MENU
, and one-touch 19 '
SYSTEM
DATA
.'
1. Press
MENU
, then one-touch 01 '
SYSTEM DATA
.'
The LCD displays user-selectable options.
2. Scroll to the options by pressing
▼
or
▲
repeatedly.
3. When the option you want appears in the display,
enter the number for the desired status. You can
use
Ã
or
¨
button and press
ENTER
to select the
desired status.
3-12-2 User-Selectable Options
These instructions assume you've followed the steps
under 'System Data Settings in User-mode' and the
machine is asking if you want to change one of the
options listed here.
3-12 System Data Set-up
There are system data settings that are set by the user in the user-mode, and system data settings set by the
technician in the tech mode.
