SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-4
This Document can not be used without Samsung's authorization
1) When removing the SPK and Motor, be careful not to
break the solder pad.
1) Be careful not to tear the Camera FPCB.
2) When lifting up the CAMERA, be careful not to
break the camera sensor.
3) Be careful not to tear the MAIN FPCB.
1) Be careful not to break the solder pad.
1) When removing the tape, be careful not to tear the
tape.
2) Be careful not to tear the FPCB.
13
14
15
1) Separate the SPK and Motor
1) Lift up the camera.
2) Separate the LCD to No.2 direction.
1) Remove the solder.
1) Remove the insulating tape.
2) Lift up the actuator and remove the camera,
Main FPCB.
Decomposition hole
Decomposition hole
1
2
16
