SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-7
This Document can not be used without Samsung's authorization
1) Attach the tape to cover all connector.
1) Attach the lighting sheet according to guideline.
1) Be careful not to tear the FPCB.
2) Be careful not to soil the Camera Lens with dust or
fingerprint.
1) When arranging the SPK/MOT WIRE, be careful not to
break the solder.
2) Be careful not to spill the sponge out of the
upper case.
5
6
8
7
1) Insert MAIN FPCB into UPPER slot.
2) Insert the camera.
1) Attach the insulating tape
1) Attach the lighting sheet.
2) Solder on the pad.
guideline
1.Insert MAIN FPCB
2. insert camera
1) Inser the SPK/MOT.
2) Attach the sponge.
