SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-9
This Document can not be used without Samsung's authorization
1) Don't scratch the surface of the handset.
Please pay attention.
1) Be careful to damage the S
-
FPCB.
1) Pay attention to the direction.
1) Pay attention to gap.
1) Be careful not to tear the FPCB.
1) When using screwdriver, be careful not to break
the screw hole.
1) Assemble from the lower position.
1) When assembling the Main B'D, Be careful not to
break the parts.
9
15
16
13
14
1. Combine FOLDER for FRONT hinge.
Insert the FPCB and FRONT into the hinge part.
1) Tighten 4 SCREWs.
1) Insert the dummy.
2) Tighten the screw.
1) Insert MAIN B'D into FRONT's groove.
2) Push and insert MAIN B'D to left side HOOK .
