9
Setting Up the WAP Browser
8
Setting Up the WAP Browser
Configuring the WAP Browser
To configure the WAP Browser:
1. In the WAP Browser menu, highlight
Settings using the
and
keys, and
then press the Select soft key. You can also
press the
key directly.
2. Select a proxy server and enter the
parameters required. Contact your service
provider for details.
Parameter
Description
Profile
Name that you wish to assign
Name
to the HTTP proxy server.
Homepage
Address of your startup
URL
homepage. When the default
homepage displays, you can
delete it using the C key and
enter your own choice.
Security
Data transmission mode.
Choose Secure to protect
your data against
unauthorised access;
otherwise, choose Non-
Secure.
IP Address
WAP gateway address required
to connect to the Internet.
Bearer
Bearer to be used for each
type of network address
accessed: GPRS or Data.
The remaining options depend on the Bearer
setting, as indicated next page.
When the bearer is set to Data
Parameter
Description
Login Name PPP server login ID.
Password
PPP server password.
Dial-up
PPP server phone number.
Number
Data Call
Data call type: Analogue or
Type
ISDN
When the bearer is set to GPRS
Parameter
Description
User Name
User ID required to connect to
the GPRS network.
Password
Password required to connect
to the GPRS network.
APN
Access point name used for
the address of the GPRS
network gateway.
Note: The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for more information.
3. After selecting each of these settings, a
dialogue box displays; you can either enter
the information required or choose between
given options. When you are satisfied with
your input, press the OK soft key.
4. When you have finished configuring the WAP
Browser, press the
key or the right soft
key.
