Getting Started
20
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by pressing
the buttons on both sides of the connector and pulling the
connector out.
Note: You must unplug the adapter before removing the battery from
the phone during charging; otherwise, the phone could be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds and a message repeats at
regular intervals on the display. If this happens, your phone
turns off the backlight to conserve the remaining battery
power.
When the battery level becomes too low, the phone
automatically turns off.
➀
➁
➀
Getting Started
21
Switching the Phone On or Off
1. Open the folder.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter a password, enter the
password and press the OK soft key. The phone password
is preset to “00000000” at the factory. For further details,
see page 163.
4. If the phone asks for a PIN, enter the PIN and press the
OK soft key. For further details, see page 164.
The phone searches for your network and, after finding it,
the idle screen appears on the display. Now, you can make
or receive a call.
Note: The display language is preset to English at the factory. To
change the language, use the Language menu
(Menu 5.5). For further details, see page 120.
5. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
Summary of Contents for SGH-P716
Page 6: ...Table of Contents 6 ...