Messages
94
Password: enter the password required to connect to the
MMS server.
APN: enter the access point name used for the address of the
MMS server.
For further details, contact your service provider.
E-mail-Profile
(Menu 1.8.5)
In this menu, you can configure various network settings that
are required when you send or receive e-mail messages.
Notes:
• Your service provider can give you information about each setting.
• If you change the e-mail settings without first checking with your
service provider, the E-mail feature may not work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to assign to the e-
mail profile.
Connect Name: enter a descriptive name for the connection.
User Name: enter the user ID required to access the GPRS
network.
Password: enter the password required to access the GPRS
network.
APN: enter the access point name used for the address of the
GPRS network gateway.
Messages
95
Broadcast
(Menu 1.9)
This network service allows you to receive text messages on
various topics, such as the weather or traffic. Cell Broadcast
(CB) messages display as soon as they are received, provided
that:
●
the phone is in Idle mode.
●
the Receive option is set to Enable.
●
the message channel is currently active on the channel list.
The following options are available:
Read: lets you view the received message. The Volatile box
displays the messages from the network, but loses its
contents as soon as the phone is switched off. Scroll through
the message by using the Up and Down keys. While reading a
message, press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel list: allows you to indicate the channels from which
you wish to receive broadcast messages. The following
options are available:
Select: use to enable or disable channels on the list by
marking or unmarking them respectively. A check mark
displays in front of each selected channel.
Add channel: use to enter the ID and title for a new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing channel.
Summary of Contents for SGH-P716
Page 6: ...Table of Contents 6 ...