113
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help
you protect the phone against unauthorized use.
The access codes (except for the PUK and PUK2
codes) can be changed using the Security menu
(Menu 9-7). See page 105 for further details.
Phone Password
The phone password can be used to avoid
unauthorised use of your phone. The password
“00000000” (8 zeros) is usually supplied with the
phone. Change the password before you start
using your phone. Keep the new password secret
and in a safe place, which is separate from the
phone.
PIN
The PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
It is usually supplied with the SIM card. When
the PIN lock feature is enabled (see page 105),
you must enter the PIN each time you switch on
the phone.
If you enter an incorrect PIN three times in
succession, enter the PUK obtained from your
network operator and press the Confirm soft
key to unlock the phone. Enter a new PIN and
press the Confirm soft key. Enter the new PIN
again and press the Confirm soft key.
PIN2
The PIN2, supplied with some SIM cards, is
required to access some functions, such as
charging unit counters. These functions are only
available if supported by your SIM card.
If you enter an incorrect PIN2 three times in
succession, enter the PUK2 and press the
Confirm soft key to unlock the phone. Enter a
new PIN2 and press the Confirm soft key. Enter
the new PIN2 again and press the Confirm soft
key.
Z105M_EN.book Page 113 Friday, July 16, 2004 9:15 PM