Call Functions
23
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
5. Press the
key to dial.
6. When prompted, press the
key to send the
DTMF (Dual Tone Multi-frequency) tones of
the number that follows the pause.
The number is sent to the system.
7. Repeat Step 6, as you are prompted.
Ending a Call
When you want to finish your call, briefly press
the
key, close the phone, or select End call
in the call options.
Answering a Call
When someone calls you, the phone rings and an
incoming call box displays.
If the caller can be identified, the caller’s phone
number, or name if stored in your contacts,
displays. If the incoming call is a restricted
number, the display shows Withheld; if it is
unknown, the display shows Anonymous.
1. To answer a call, open the phone. If it is
already open, press the
key, the OK key or
the Accept soft key.
2. End the call by closing the phone or pressing
the
key.
Note: You can answer a call while using the menu
functions. The current operation is cancelled.
Rejecting a Call
To reject an incoming call, press and hold the
key on the right side of the phone.
When the phone is open, you can also press the
Reject soft key or the
key.
Z105M_EN.book Page 23 Friday, July 16, 2004 9:15 PM
