_
SHD-3000F
InSTallaTIOn InSTruCTIOnS
Select an installation position or place that can endure more than 4 times of the total weight
of the installation structure.
At least 250mm or more of spare height is required above the
CEILING BOARD
.
CEILING BOARD
’s thickness should be less than 40mm.
Be sure to secure the SAFETY WIRE to avoid a product fall.
If you want to attach the camera to the ADAPTOR, use the only provided SCREWS.
InSTallaTIOn
(indoor type)
Place the
TEMPLATE
on the
CEILING BOARD
and drill a guided hole.
❶
Remove the round filling (“C”) from the
TEMPLATE
.
2
Place
TeMPlaTe
A onto the
CeIlInG bOard
to which you will attach the ceiling
mount ADAPTOR and drill a hole of Ø198mm in diameter.
See the figure below for the hole shape.
1.
.
3.
.
.
1.
그림수정함
250mm 이상일 것
천장보드
40mm 이하일 것
More than 250mm
CEILING BOARD
Less than 40mm
Ø198mm
형판
천장 보드
Ø198mm
TEMPLATE
CEILING BOARD
