4
/
12
z
Z-Wave plus info (V2)
-
Z-Wave Plus Version : 02
-
Role Type : LSS (Listening Sleeping Slave)
-
Node Type : Z-Wave Plus Node
z
Manufacturer Specific (V2)
- Device ID Type : 01(Serial Number)
- Device ID Data Format : 01 (Binary)
- Device ID Data Length Indicator : 16
- Device ID : XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
z
Version (V2)
-
Z-Wave Protocol Library Type : 03
-
Z-Wave Protocol Version : 04
-
Z-Wave Protocol Sub Version : 05
-
Firmware 0 Version : 01
-
Firmware 0 Sub Version : 03
-
Hardware Version : 01
z
Door Lock (V2)
-
support Unsecure(0x00), Secure(0xFF)
Note : When using
‘
Operation_Set
’
command, lock will execute
‘
Unsecure(0x00)
’
then
perform
‘
Auto Re-lock
’
if door is not open.
When using
‘
Operation_Get
’
command, lock can response after executing
‘
Operation_Set
’
command. (take about 2 seconds)
z
User Code (V1)
-
Lock will accept maximum 30 pin codes that are 4-10 digits in length.
①
Supported Users : 30
②
User Type : Number, Card (Key Tag)
⋅
Card (Key Tag) : Cannot be registered through Z-Wave
③
ID Range
⋅
Number : 1 ~ 30
