4-3
4-4
DIGITAL VIDEO RECORDER
2
Record Lock
GB
GB
3
Alarm Record
Record Lock
Press the REC LOCK button during recording to lock the recording. Then, the LOCK status
indicator LED and the REC LOCK button will light up. At this time, pressing the STOP(
■
)
button will not stop the recording. An icon appears on the top left of the screen when in
the Recording Lock mode.
(Please refer to “Viewing Screen during Recording” on p. 3-5.)
Record Lock Release
Press the REC LOCK button while in the Recording Lock mode to cancel the Recording
Lock. Then, the lights in the LOCK status indicator LED and REC LOCK button will turn
off. At this time, pressing the STOP(
■
) button will stop the recording. If the
PASSWORD
LOCK
of the
SYSTEM SETUP
menu is set to
ON
, you must enter a password to cancel
the recording lock. At this time, if the password entered matches the one set in the
PASS-
WORD
of the
SYSTEM SETUP
menu, then the recording lock will be cancelled; other-
wise, it will not be cancelled.
Record in Alarm Occurrence
There is an alarm input terminal (ALARM IN) on the external I/O port at the back panel of
the SHR-3010 system. Connect here the alarm output terminal of an external device, such as
Multiplexer. (
For detailed information on connections, please refer to “3. System
Connection for Alarm Recording” on p. 2-3.
) Next, set the
ALARM ENABLE
of the
ALARM RECORD SETUP
menu to
ON
to begin recording whenever alarm is triggered.
Also, set the
MOTION DETECTION
of the
ALARM RECORD SETUP
menu to
ON
to
begin the alarm recording whenever a motion is detected within the area set in the
SET
AREA & SENSITIVITY
.
Release of Alarm Record
If the system is not in the alarm recording mode, in order to cancel the alarm recording
mode, set the ALARM ENABLE and MOTION DETECTION of the
ALARM RECORD
SETUP
menu to
OFF
. To force stop the recording during the recording started by an alarm,
press and hold the STOP(
■
) button for 3 seconds. Then, the recording by the current alarm
will be stoppted, and the alarm recording will not be performed for the next 5 seconds even
if alarm occurs. To completely stop the alarm recording, go into the menu within those 5
seconds to set the
ALARM ENABLE
to
OFF
. If no action is performed by the user for 5
seconds, the system returns to the alarm recording mode.
Summary of Contents for SHR-3010
