User’s Manual
38
Highlight the box beside
Panic Recording Speed
and press the
button. A drop-down list
of panic recording speeds appears. You can select from 1 image per 10 seconds to 60 images
per second for NTSC (to 50 images per second PAL).
NOTE: If you have set the
Record Resolution
for
High
, you will not be able to select 60
ips NTSC (50 ips PAL).
Highlight the box beside
Panic Recording Quality
and press the
button. A drop-down list
appears. You can select from
Very High
,
High
,
Standard
and
Low
image quality that recorded
at panic recording mode.
Highlight the first box beside
Auto Deletion
. Pressing the
button toggles between
On
and
Off
. When set to
On
, the DVR will delete video recorded earlier than user-defined period.
Highlight the second box beside
Auto Deletion
, and press the
button to select the length of
time recorded data will be kept from 1 to 99 Days.
You can save your changes by highlighting
OK
and pressing the
button. Selecting
Cancel
exits the screen without saving the changes.
Time-Lapse Record Mode Setup Screen
Figure 45 — Time-Lapse Record Setup screen.
Highlight the box under the
Speed
heading and press the
button. A drop-down list of record
speeds appears. You can select from 1 image per 10 seconds to 60 images per second for NTSC
(to 50 images per second PAL).
NOTE: If you have set the
Record Resolution
for
High
, you will not be able to select 60
ips NTSC (50 ips PAL).
Summary of Contents for SHR-3091
