1
2
3
1
5
6
4
2
appendix _
53
09
A
PP
EN
D
IX
Recording Schedule
This function allows you to setup a recording schedule
for the DVR by each camera per hour.
1. Schedule Timeline:
You can set a variety of recording mode on time of
each cameras. After you select recording mode,
designate scope by dragging mouse.
2. Recording Mode:
It shows a variety of recording type. Select recording
type and drag it to schedule line.
Continuous:
Records continuously.
Motion:
Recording only when motion is detected on
screen.
Alarm In:
Recording only when Alarm In is activated.
EVENT
Motion Detection
This Motion Detection uses connected with recording,
alarm, emergency when motion is detected.
1. Camera:
Select channel to setup camera.
2. Motion Detection Area:
Designate scope of motion detection area to see
movement of picture in camera. It will be marked green
color.
Motion detection scope designation:
Click mouse
left button to designate the area of motion detection
Motion detection scope cancellation:
Click mouse
right button to cancel the area of motion detection .
3. Sensitivity:
it can set up detection level about motion detection
area.
4. Use Beep:
It makes beef when movement is found in motion
detection area .
5. Linked Camera:
Select camera which will connect with motion detection
type camera. If motion detection type camera detect
any movement, it will record with selected camera.
6. Linked Alarm Out:
Select alarm out to connect with camera which is set
up motion detection.
SHR-5042_Eng.indb 53
2007-06-08 ｿﾀﾈﾄ 1:25:22
