backup _
37
06 BACKUP
If there is a predefined device connected, the
window displays the device information like
the free space and such. You can also use the
BACKUP
button on the front of your DVR.
To configure the related settings
1.
Set the start date and time using the
Direction
buttons and the
ENTER
button.
2.
Set the end date and time using the
Direction
buttons and the
ENTER
button.
3.
Select a channel for backup using the
Direction
buttons and the
ENTER
button.
4.
Optional: If you want to change the current
file name, use the virtual keyboard. The file
name format is HHMM (maximum 4 digits)
and the format of folder is YYYYMMDD.
5.
When multiple devices are connected, press
USB Memory
at the bottom-left corner to
select a backup device. If you select the
built-in CD or USB CD/DVD, the recording
format is fixed to AVI. When
Check
is
selected, the file size of the selected time
and channel, and residual memory size of
the device are displayed.
6.
When all settings are complete, press
Start
to begin the backup process. When
the backup starts, the backup progress is
displayed. If you select Stop on the progress
window, the backup stops. If you select
Exit, the screen changes to the upper menu
without stopping the backup.
In case of SHR-5160 and SHR-5080, they
do not include the built-in DVD writer so that
backup function is not available for built-in
CD/DVD.
CAUTION
[In Backup Process]
If you press
Exit
while the backup is in
progress, the screen goes to the upper
menu but it does not affect the backup
process. The running speed of the
product may be lowered while the backup
is in progress.
When performing backup on USB CD/
DVD or memory, you cannot use the
actual capacity of the device because a
part of the capacity is used for the system.
This device doesn’t support the backup
for memory cards, flash cards, and
memory sticks such as SD, CF, MMC,
etc. The virtual keyboard does not support
the input of special characters or space.
When the CD or DVD is malfunctioning,
its tray frequently opens and closes, and
then the backup fails. In this case, retry
the backup after exchanging the media.
WARNING
The backup data could be damaged by
the surface state of the disk when using
CD or DVD.
The file name is created with the start time of
backup data.
(YYYYMMDD)/(HHMM+ four digits of the serial
number)
The backup file can be separated in the
following conditions:
- Different units in file size (1GB for DVD, 2GB
for others)
- Change in recording conditions
- Discontinuous recording data
Codec is required to play an AVI backup file,
which is also copied along with the installation
file in the AVI backup process. Run a codec
setup file, “MP4Codec.exe”, to install the
codec on the PC. “INDEX.xml” is included
in the AVI backup file, which enables you
to check and enjoy a desired file at your
convenient time. In case of USB external
HDD and USB Flash Memory, the backup is
available only with formatting FAT32 partition.
To format FAT32, Format the device as FAT32
in the PC or erase the device in the Storage
Setup menu, which enable to backup files.
In case of back-up devices, please check the
compatibility list of the storage devices. The
list of the compatible devices with Samsung
DVR can be obtained from your vendor.
The backup of the AVI format may take longer
depend on a number of the channel and the
DVR operation environment (e.g. recording,
network)
In case of SHR-5082/5080, only 8 channels
are displayed.
backup
Cancel
Start
Backup
Folder/Filename
20070131/ 1017
CD/DVD
Select / Free : 0.00/410.91M(0.00%)
Backup Dev : CD/DVDW SH-S182D
Check
AVI
Start Date / Time
End Date / Time
2007-01-31 10:17:10
2007-03-31 10:17:20
CH
CH 1
CH 2
CH 3
CH 4
CH
CH 5
CH 6
CH 7
CH 8
CH
CH 9
CH 10
CH 11
CH 12
CH
CH 13
CH 14
CH 15
CH 16
SHR-5162_Eng.indb 37
2007-8-2 14:47:44
