search & play _
45
44
_ search & play
09 SEARCH & PLA
Y
search & play _
45
44
_ search & play
09 SEARCH & PLA
Y
Playback mode
You can change the screen display method
using the
MODE
button and
NUMERIC
buttons as shown in the figure. The 16-split,
12+1 split, and 15+1 split screens are shown
only in SHR-5162/5160.
-
Single screen:
Comes up when you select
and play only 1 channel using the Search
menu.
-
4-split screen:
Comes up when you select
and play 2 to 4 channels using the Search
menu.
-
9-split screen:
Comes up when you select
and play 5 to 9 channels using the Search
menu.
-
16-split screen:
Comes up when you select
and play 16 channels using the Search
menu.
-
PIP screen:
Comes up when you press
the
MODE
button while playing on a
single screen. (The main screen displays
the playback channel, and the sub screen
displays the live channel.) You can move
the sub screen up or down using the
UP/
DOWN
direction buttons. When you press
the
ENTER
button, a blue bar appears on
the live screen. To change the channel in
the sub screen, press the desired channel
number using the
NUMERIC
buttons on the
front panel or remote control.
-
N+1 split screen:
Shows x number of (N)
live channels and 1 play channel on the
screen. In the case of 9+1 split screen, you
can set the location of the play channel from
the menu.
Speed play
To play the recorded images at a faster speed,
press the
Fast Forward
(
) or
Fast Rewind
(
) button during playback to see the screen at
x2, x4, x8, x16, x32, and x64 speed forwardly
or reversely.
Viewing still images
If you press the
Fast Forward
(
) or
Fast
Rewind
(
) button while the screen is paused,
you can see still images forwardly or reversely.
During reverse search, the interval between
cuts may vary depending on the recording
specification.
Audio playback
Audio data can be played or recorded only in
4 channels (CH1, CH2, CH3, and CH4). So to
hear the sound of the recorded file, change the
channel to any of CH1, CH2, CH3, and CH4.
In a split screen (5, 9, or 16-split screen), to
select an audio channel, press the
ENTER
button and move the displayed blue bar to any
of four channels.
Using the
AUDIO
button, you can activate
or deactivate the audio playback. When the
audio function is active, the audio sign on the
screen turns yellow. When the audio function
is disabled, the audio sign on the screen turns
white.
16/9/4 split
Live channel
Play channel
Mode button
Number buttons
Single
PIP
8 +1 split
12 +1 split
15 +1 split
SHR-5162_Eng.indb 45
2007-8-2 14:48:14
