Initialization (also known as factory reset)
1.
Open Battery Cover
2.
Hold the [Register] button for 5 seconds
3.
When the number pad is lighted, enter 4560852580 then press [*]
Password Change
*register password after initialization, and remember to hold the door opened*
1.
Briefly press the [Register] button
2.
Enter the default password after initialization “12345” when the number pad is lighted
and press the [*]
3.
Enter a new password (5 to 12 digits) and press the [*] button
4.
Re-enter new password and press [*]
Adding a Card or Key Tag
Up to 20 maximum
1.
Pressing the [Register] button(from the inside)
2.
Entering the password(from the outside) then press [*]
3.
Placing the card or key tag on the card reader from the outside
To register more cards: place another card on the reader within 20 seconds of registering
previous cards
Deleting a Card or Key Tag
* All Cards/Key Tags are deleted*
1.
Press and hold the [Register] button for 3 seconds
2.
Enter the password on the keypad and press [*]
Opening Door from the outside with a password
1.
Pressing the [Enter Number] button (Silver button on the bottom of the touchscreen
pad)
2.
Enter the two arbitrary buttons that are lighted in order
3.
When all the numbers are lighted, enter your password and press [*]
