36
Intrusion Detect Function
A warning alarm will sound if someone tries to break the door-lock or force the door
open. (This function is not selectable and set as factory default.)
How to cancel the warning alarm
Fire Alarm
If a fire detected, the door-lock will go off a warning alarm to allow people to
escape.(This function is not selectable and set as factory default.)
If someone tries to break the door-lock
or force the door open, the automatic
lock sensor will detect it and will sound
a warning alarm.
[Indoor]
Beep ~ Beep ~ Beep ~
(For 5 minutes)
After open the battery cover, pull out batteries,
or press a button among [Password],
[Fingerprint], [Remote], or press the [Open]
button of the remote controller.
[Outdoor]
or
[Indoor]
or
Place a registered fingerprint or enter the
password and press [
¹
] button to open
the door.
The thermal sensor of the door-lock will detect a fire and go off a warning alarm. After the
warning alarm, the door-lock will be unlocked automatically.
(If the indoor temperature come down, the door-lock will be restored and resume.)
Beep ~ Beep ~ Beep ~
(For 15 seconds)