9
12
11
10
7
Double security mode prevents password exposure by pressing a password
after authenticating any two numbers.
How to Turn Double Security Mode On/Off
Open the battery cover and press the
[Registration] button briefly.
To set/release Double Security Mode, press
[7] or [9] and then press the [
] button.
DING-DONG
DING DONG DENG
Two Factor Authentication is a security enhanced feature by authenticating
with both a password and a card to open the door.
To set the Two Factor Authentication Mode, at least one card must be
registered.
Open the battery cover and press
the [Registration] button briefly.
To set/release Double Authentication
mode, press the [4] or the [6] and then
press the [
] button.
DING-DONG
DING DONG DENG
[7] : Double Security Mode
[9] : Button: Normal Mode
How to Turn Two Factor Authentication Mode
On/Off
[4] Button: Two Factor
Authentication Mode On
[6] Button: Two Factor
Authentication Mode Off
Operating Two Factor Authentication Mode
Touch the
[Number Pad].
CARD
When the [Number Pad]
lights up, enter [Password]
and press the [
] button.
Contact a registered card at
the [Card Reader Part]. When
authentication is successful,
the door opens.
Success:
DING DONG
DENG
Fail:
DING-DONG
DING-DONG
Success:
DING DONG
DENG DONG
Fail:
DING-DONG
DING-DONG
While the double lock is set, the door cannot be opened by a password or a
card (key-tag).
While the Double Lock Function is on, if somebody touches the number
pad, a double lock beep will sound and the door cannot be opened.
How to Set Double Lock On/Off
Setting the Double Lock Function On
Setting the Double Lock Function Off
8
While locked, press the [Open/Close] button
for 3 seconds.
The double lock function will be off automatically when
the [Manual knob] is turned or the [Open/Close] button
is pressed briefly.
Auto Lock, which automatically locks the door when closing the door, can
be set. New products have been set to the Automatic Locking.
How to Set Automatic/Manual Locking
Open the battery cover and press
the [Registration] button briefly.
To convert to automatic or manual lock,
press [3] and then press the [
] button.
DING-DONG
You can set the volume level of the sound that is generated when entering
the password, locking the door, or opening the door. New products have
been set to ring all sounds. (mid-level)
How to Set/Turn Off Sound
Open the battery cover and press
the [Registration] button briefly.
To set sound, press [10] ~ [13] for the desired
level and then press the [
] button.
DING-DONG
[10] Button : Mute
[11] Button : Low Level
[12] Button : Mid Level
[13] Button : High Level
DING DONG DENG
- Automatic: When closing the door, the door will be automatically locked after 2 seconds.
But it does not function when the battery is dead.
- Manual: When closing the door, the door will not be automatically locked. In this case,
press [OPEN] button of the Inner Body or touch the [Number Pad] and then
press [
] to manually lock the door.
1. Pressing [Registration] Button
2. Sound Setting
DING DONG DENG
- [10] Button : Mute (No sound will be delivered except alarm sound)
- [11]~[13] Button : The higher the level, the higher the volume becomes.
Can adjust the volume of the melodies (Chime) that sounds when the door is
open while the manual locking is set. New products have been set to ring all
sounds. (Mid level)
How to Adjust Melody (Chime)
Open the battery cover and press the
[Registration] button briefly.
To set melody, press [20] ~ [23] for the
desired level and then press the [
] button.
DING-DONG
[20] Button : Mute
[21] Button : Low Level
[22] Button : Mid Level
[23] Button : High Level
1. Pressing [Registration] Button
2. Sound Setting
DING DONG DENG
- [20] Button : Mute (No melody will sound.)
- [21]~[23] Button : The higher the level, the higher the melody volume becomes.
Open the battery cover and then press the [Registration] button or remove
batteries. Touch the Number pad and contact a registered card/key-tag on
the Number Pad or enter the password and then press the [
] button.
This function sets to sense cards or key-tags automatically or manually.
How to Set Automatic/Manual Card Reading
Open the battery cover and press the
[Registration] button briefly.
To set Automatic/Manual Card Reading,
press [5] or [8] and then press the [
]
button.
DING-DONG
DING DONG DENG
●
New products have been set to the Automatic Card Reading, and the
batteries will last longer with the Manual Card Reading Setting.
Caution
●
When the Automatic Card Reading is set, the door will open after touching a
registered card on the Card Reader Part.
●
When the Manual Card Reading is set, the [Number Pad] must be touched first and
then the door will open after touching a registered card on the Card Reader Part.
Note
[5]: Automatic Reading On
[8]: Manual Reading On
If the “Fur Elise” melody sounds when opening the door with a password or a card, it
is time to replace the batteries.
(The low battery LED indicator under the Card Reader Part lights up when the melody
sounds.)
How to Replace Batteries
When the battery replacement melody sounds
Replace all 4 batteries within one week of hearing the melody.
- If you use the door lock system continuously without replacing batteries, operation
will stop.
Replacing the batteries
Caution
●
The duration of battery life may vary depending on the manufacturer,
manufacturing date, and operating environment. (4 AA alkaline 1.5V
batteries can be used for 10 months if the door lock is used 10 times per
day)
●
If liquid leaks from the batteries, it may damage the product. Please check
the batteries regularly (every 6 months).
●
If the battery replacement melody sounds, you cannot register/change
the password/card information or set any features until the batteries are
replaced.
If you use the door lock continuously without replacing batteries after the
replacement melody sounds, the batteries will be completely discharged
and the door lock will stop working.
How to Use Emergency Battery
Opening the Door Using an Emergency Battery
Purchase emergency battery (9V) at the nearest store.
- A 6LF22(9V) Alkaline battery must be used as an emergency battery.
Insert a 9V battery into the external power outlet and place the card/key-tag on
the card reader or enter the password.
When the door lock is not operated properly from the outside, an alarm
sounds and the door lock will not function.
- When trying to open the door with an unregistered card/key tag or password input
fails 5 times in a row, the door lock will not work for 4 minutes.
This function sounds an alarm when the door is forcefully opened from the
inside or outside.
(This feature is enabled by default and cannot be set/released separately.)
Sensors will detect if the door is forcefully opened when the door is closed, and the
alarm will sound for 5 minutes.
If the indoor temperature rises abnormally, the temperature sensor will
detect it and an alarm will sound. (This feature is enabled by default and
cannot be set/released separately.) Fire Detection feature is activated when
the temperature rises to around 65°C. The activating temperature may vary
depending on the installation environment.
In case of fire, the temperature sensor will detect it and an alarm will sound for 15
seconds. The door will open automatically after the alarm sound stops. (When the
temperature reduces, the door lock returns to normal working status.)
Fire Detection Function
Item
Specifications
Rated Voltage 4 AA alkaline 1.5V batteries (LR6) (6V)
Emergency
Power
9V battery (6LF22) (Sold separately)
Operation
System
Electronic Control (Password Entry, Card Reading,
or Key-tag Reading)
Weight
1.18 kg (Including the Inner and Outer Body)
Product
Dimensions
Outer Body 78mm (W) X 173.4mm (H) X 18.1mm (D)
Inner Body 72.7mm (W) X 171.1mm (H) X45.3mm (D)
Product Specifications
●
The contents of this manual may be changed without prior notice in order
to improve product performance.
Temper Prevention Function
Intrusion Detection Function
How to Turn Alarm/Emergency Sound Off
Safety Mode is a security enhanced feature by pressing both the
[Safety
button]
and the [Open/Close] button to release the lock.
How to Turn Safety Mode On/Off
Open the battery cover and press
the [Registration] button briefly.
Enter the number of [0] and press the [
]
button to set or release the Safety Mode.
DING-DONG
It is a function that prevents intrusion while there is nobody home. In this
setting, if there is an attempt to operate the door lock from inside the home,
an alarm sound is generated.
During the setting of the Guard Mode, if somebody opens the door from
inside the house, an emergency alarm will sound for 5 minutes.
How to Turn Guard Function On/OFF
Guard Mode On
Guard Mode Off
When the door is locked, the
[ ]
button on the number pad lights up.
Press the
[ ]
button within 3 seconds
to set the Guard Mode.
Put the registered card or key tag on the
card reader after touching the number pad,
or press the [
] button after entering the
password.
DING DONG DENG
How to Open and Close the Door from the Inside
1. Electronic Door Opening and Closing 2. Manual Door Opening and Closing
When the door is locked, press the
[Open/Close] button on the Inner Body to
open or close the door.
When the door is locked, turn the [Manual
knob] in the direction of [
] or [ ] to open
or close the door.
●
Safety Mode settings operate only when the door opens.
●
New products have been set to the Safety Mode off.
●
Operation when the Safety Mode is on: The door opens when the [Open/
Close] button is pressed within a second after the
[Safety button]
on the
Inner Body is pressed.
Note
DING DONG DENG
CARD
CARD
Or
