COLOR CCD CAMERA
User’s Manual
1
SAMSUNG CCD CAMERA
SID-42CN / CP
SID-22CN / CP
MINI DOME CAMERA
INSTRUCTION MANUAL
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy
for later reference.
P/No. : 6086-0447-01A
VAN 03. 11
• SAMSUNG TECHWIN CO., LTD.
Optics & Digital Imaging Division 145-3,
Sangdaewon 1-Dong, Jungwon-Gu, Sungnam,
Kyungki-Do, Korea 462-703
TEL: 82-31-740-8137~41 FAX: 82-31-740-8145
• SAMSUNG OPTO-ELECTRONICS AMERICA,
INC. (SOA)
Closed Circuit Division 40 Seaview Drive,
Secaucus N.J 07094, U.S.A
TEL : (201) 902-0347 FAX: (201) 902-0429
• SAMSUNG OPTO-ELECTRONICS UK LTD
(SOUK)
Samsung House, 1000 Hillswood Drive Hillswood
Business Park Chertsey Surrey KT16 OPS
TEL: 44-(0)1932-45-5308 FAX: 44-(0)1932-45-5325
• TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,
LTD (TSOE)
7 Pingchang Rd, Nankai Dist, Tianjin, P.R China
Post Code : 300190
TEL : 86-22-2761-9698 FAX: 86-22-2761-6514
SALES NETWORK
www.samsungtechwin.com
www.samsungcctv.com
This installation should be made by a qualified service person and should conform to all local codes.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
INFORMATION-
This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will required to correct the interference at his own expense.
WARNING -
Changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
CAUTION :
To prevent electric shock and risk of fire hazards:
Do NOT use other than specified power source.
Do NOT expose this appliance to rain or moisture.
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and proper input power
voltage. In order that you can understand this manual thoroughly, we'll introduce our
model description.
SID-42C Model Series (410,000 Pixels) SID-22C Model Series (270,000 Pixels)
SID-42CN
SID-22CN
SID-42CP
SID-22CP
Model Description
SID-42CX SID-22CX
• Pickup Device
42C
410,000 Pixels Color CCD 22C
270,000 Pixels Color CCD
• Signal System
N
NTSC P
PAL
Pickup Device
PRECAUTIONS
GETTING TO KNOW YOUR CAMERA
FEATURES
INSTALLATION
Do not install the camera in extreme
temperature conditions.
Only use the camera under conditions where
temperatures are between -10˚C and +50˚C.
Be especially careful to provide ventilation
when operating under high temperatures.
Do not install or use the camera in an
environment where the humidity is high.
It can cause the image quality to be poor.
Do not touch the front glass of the
camera.
It is one of the most important parts of camera.
Be careful not to be stained by fingerprint.
Never keep the camera face to strong
light directly.
It can damage the CCD.
Do not drop the camera or subject
them to physical shocks.
It can cause malfunctions to occur.
Do not expose the camera to rain or
spill beverage on it.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that corrode the
electronic components.
Never use the camera close to a gas
or oil leak.
It can cause malfunctions to occur.
Do not install the camera under
unstable lighting conditions.
Do not disassemble the camera.
There are no user-serviceable parts inside it.
Severe lighting change or flicker can cause
the camera to work improperly.
• If the camera is exposed to spotlight or object reflecting the strong light, smear or blooming may occur.
• Please check the power whether it satisfies the normal specification before connecting the camera.
Notes
Front
High Resolution:
The horizontal resolution of 480 TV lines can be achieved by using a high density
CCD having effective 410,000 pixels, which provides clean, noiseless and reliable pictures. (SID-22C
series have 270,000 pixels and can achieve 330 TV lines.)
Powerful Back Light Compensation:
The BLC technology allows the camera to obtain the clear
picture, the finest detail and perfect light contrast al though there is strong light back of the subject.
Functional Selection Switches:
Camera Control is available using DIP switches.
Pan and Tilt:
Pan and tilt are available after installing camera
Accessories
Installing Camera
Pan Base
You can rotate the lens from 360˚
Functional Selection
Switches
You can control the
camera Using DIP Switches.
Tilt Base
You can adjust up and
down the camera(10°~90°).
Back
User Manual
Quick Install Guide
Cable Rubber
Template
M4 Taping Screw 2EA
1. Fix the camera to a ceiling or a wall using two screws.
2. After fixing it, adjust its pan base and
tilt base properly.
3. After adjusting them, secure the shield case and dome-
cover.
Hole
Signal System (NTSC or PAL)
MINI DOME CAMERA
USER’S MANUAL
5
MINI DOME CAMERA
USER’S MANUAL
4
MINI DOME CAMERA
USER’S MANUAL
3
MINI DOME CAMERA
USER’S MANUAL
1
MINI DOME CAMERA
USER’S MANUAL
2
MINI DOME CAMERA
USER’S MANUAL
6
Scerw
Scerw
Scerw
Shield Case
Dome Cover
Hole for fixing camera
Label
Power Input Terminal
Power Input Jack
BNC Jack
Label for Terminal Type
Label for Jack Type
