Samsung SL-M4580FX Service Manual Download

Page: 144 / 252

4. Troubleshooting

4.5.5.4. Adjustment

Print Adjustment

•

Diagnostics > Adjustment > Print Adjustment > Automatic Adjustment

Purpose

To calibrate/adjust the lengths of vertical & horizontal image and image position automatically in
print engine.

Operation Procedure

1) Press “Paper Supply” button and select a tray.

2) Press “Paper Size” button and select a paper size of the previously selected tray.

3) Press “Print” button. A test pattern will be printed out.

4) Place the printed pattern on platen.

•

The words “front side” on the chart face the glass

•

The arrows face left edge of the platen

•

Press “Scan 1”

5) Place the printed pattern on platen.

•

The words “back side” on the chart face the glass

•

The arrows face left edge of the platen

•

Press “Scan 2”

6) Press “OK” button. Automatic scanning will occur .

7) Locate the back side of Scanner A/S Chart at the scanner glass again and press “OK” button

once more.

8) The system will automatically calculate the proper value based on scanning result of the

test pattern.

9) The new values are set to the system.

4-41

Summary of Contents for SL-M4580FX






















































































































































































































































Search results

Summary of Contents for SL-M4580FX

Reviews:

Related manuals for SL-M4580FX

Brands by name

Popular brands

Samsung SL-M4580FX, Service Manual

Search results

Summary of Contents for SL-M4580FX

Reviews:

Related manuals for SL-M4580FX

Brands by name

Popular brands