Samsung SL-X7600GX Service Manual Download | Manualshive

Page: 15 / 521

background image

1.

Precautions

1.2.5. Disregarding this warning may cause bodily injury

1) Be careful with the high temperature part.

The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser unit to
cool down before disassembly.

2) Do not put fingers or hair into the rotating parts.

When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor, fan, etc.).
If do, you can get harm.

3) When you move the printer, use safe lifting and handling techniques.

This printer is heavy. Use the lifting handles located on each side of the machine. Back injury could be caused if
you do not lift carefully.

4) Ensure the printer is installed safely.

Ensure the printer is installed on a level surface, capable of supporting its weight. Failure to do so could cause the
printer to tip or fall possibly causing personal injury or damaging the printer.

5) Do not install the printer on a sloping or unstable surface. After installation, double check that the printer is stable.

Copyright© 1995-2013 SAMSUNG. All rights reserved.

1-5

«
...
13
14
15
16
17
...
»

Summary of Contents for SL-X7600GX










































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SL-X7600GX

Brand: Olivetti Pages: 43

Brand: Hitachi Koki Pages: 207

Brand: Xerox Pages: 2

Brand: Inepro Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands