Samsung SL-X7600GX Service Manual Download

Page: 226 / 521

3. Disassembly and Reassembly

3.3.34.2. DSDF Stacker Sensor

Open the DSDF-open cover.

Remove 4 screws.

Pull the pick up module to the front and unplug the
connector while lifting up its front.

Push the lower part of the cover to release the lock by
stopper.

Release the Stacker Upper Assy while keep the status
of step 4.

Release the harness from the marked position. Place the
Stacker Upper Assy on the rear cover.

3-69

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands