Samsung SL-X7600GX Service Manual Download

Page: 263 / 521

4. Troubleshooting

4.4. JAM removal

4.4.1. Clearing original document jams

When an original jams while passing through the document
feeder, a warning message appears on the display screen.

CAUTION

To avoid tearing the document, remove the jammed
document slowly and gently.

NOTE

To prevent document jams, use the scanner glass for thick,
thin, or mixed paper-type originals.

Original paper jam in front of scanner

1) Remove any remaining pages from the ADF.

2) Open the ADF cover.

3) Gently remove the jammed paper from the ADF.

4) Close the ADF cover.

4-12

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands