Samsung SL-X7600GX Service Manual Download

Page: 278 / 521

4. Troubleshooting

4.5.3.3. Software Version

•

Information > Software Version

This menu displays all the version of the software installed in the system in detail.

4.5.3.4. Service Hours

•

Information > Service Hours

This menu displays two items, “Power on Hours”, “Power Save Hours”.

Power on Hours : It indicates the hours of system power on since the first booting of the system.

Power Save Hours : It indicates the hours of system power save since the first booting of the system.

4.5.3.5. Fault Log

•

Information > Fault Log

This menu displays faults occurred while the system was operating.

Pressing clear button will clear all the save fault log of the system.

4.5.3.6. Print Reports

•

Information > Print Reports

This menu displays reports which that can be printed from the system. The following reports will be available to print.

Supplies Information

Usage Counter

Error Information

Fax Protocol Dump (Line 1)

Fax Protocol Dump (Line 2)

Fax Diagnostics (Line 1)

Fax Diagnostics (Line 2)

Auto Color Registration

Job Duty

Auto Toning History

Full Auto Color Registration

ID Calibration History

Maintenance

Toner Event

Auto Color Registration

•

Information > Print Reports > Auto Color Registration

This report lists last 10 Auto Color Registration results.

4-27

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands