Samsung SL-X7600GX Service Manual Download

Page: 305 / 521

4. Troubleshooting

Copy Adjustment

•

Diagnostics > Adjustment > Copy Adjustment > Image Position

Purpose

Manually adjust copied image position on paper in copy engine

Operation Procedure

NOTE

Before copy adjustment,

1) Please make sure that initial values of margin adjustment must be the same as values of print

adjustment.

2) It is recommended to perform adjustment for each tray at a time. i.e. do not select “All” for

tray selection. It often causes confusing for the adjustment.

3) The Procedure for copy adjustment is almost same as “Print Adjustment”.

NOTE

•

Adjustment must be done for each tray (Tray X, MP).

•

It is recommended not to choose “ALL” for tray selection.

•

It is always better to adjust for a particular tray at each time.

1) Select a tray required adjustment.

2) Change the adjustment value with ”+”, “-” then press “OK” button to save changes.

•

Simplex Leading Edge

•

Simplex Side Edge

•

Duplex Leading Edge

•

Duplex Side Edge

3) Print out the test pattern and check if the image is moved as you want. If not, repeat stpe2.

4-54

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands