4. Troubleshooting
4.5.6. Service Functions
4.5.6.1. Main Memory Clear
•
Service Functions > Main Memory Clear
This function resets the main memory of the system to the factory default setting. It can be used to reset the system to the
initial value when the product is functioning abnormally. All the user configured values return to the default values.
To clear the main memory, users need to select the country of the system locates, and rebooting of the system is required.
4.5.6.2. Hard Disk Maintenance
•
Service Functions > Hard Disk Maintenance > Device Configuration Data Clear
-
This function formats all device configuration data, for example, user profile, address book, and devices settings,
on the hard disk.
•
Service Functions > Hard Disk Maintenance > Temporary and Spool Data Clear
-
This function formats all temporary and spool data saved on the hard disk.
•
Service Functions > Hard Disk Maintenance > User Saved Data and Log Data Clear
-
This function formats all the user data, for example, box data, pending secure jobs, font, form, macro, data related
applications, and job log, on the hard disk.
•
Service Functions > Hard Disk Maintenance > All Saved Data Clear
-
This function formats all the data that can be erased with 3 functions above. The function will NOT format the
hard disk entirely.
•
Service Functions > Hard Disk Maintenance > Hard Disk Check
-
This function checks a bad sector in the hard disk. If a bad sector is found, the system will display an error message
and send an email notification to the system administrator.
4.5.6.3. Count Setting of Large Page
•
Service Functions > Count Setting of Large Page
This function sets count of large page, such as A3 and ledger size, to 1 count or 2 count of the total count.
For example, the total use of 100 A4 impressions and 100 A3 impressions will become 200 impressions if the configuration
is set to “1 Count Up” while the total will be 300 impression if the configuration is set to “2 Count Up”.
4-63
Copyright© 1995-2013 SAMSUNG. All rights reserved.
