Samsung SL-X7600GX Service Manual Download | Manualshive

Page: 321 / 521

background image

4. Troubleshooting

4.5.6.16. SFE (Special Feature Enablement)

•

Service Functions > SFE

Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or
dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.

NOTE

The description for some codes like a 003, 020 can not be provided by HQ R&D policy.

SFE menu description

SFE
Code

Description

001

In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output
direction regardless of simplex or duplex.

002

The device always prints output as mono about PC printing.

003

confidential

006

The device supports only user's own email address for scan to email.

007

[PCL6] The device prints as original 1 dot line without 2 dot line compensation.

008

[PCL5] The device ignores paper size command in PRN and prints as paper size in tray.

009

PJL readback response is changed with HPOS.

1) Add <CR><LF> to EOJ response.

2) No EOJ job but EOJ response occurs.

3) Device uses Job name instead of EOJ name.

010

Maximum value of 'Power save time' is increased as 240 min.

012

If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically.

013

The device ignores the USB memory stick and detects only card reader.

014

When the authenticated user uses scan to email, user's email address is added automatically.

015

The device supports to connect to LDAPs server without any certificate.

016

The device fits image appearance in report page

018

The device blocks apk installation.

019

User ID is not case-sensitive for login

020

confidential

021

confidential

022

The device supports "A6 LEF" in original size for scan service.

023

The device rotates copy output 180 degrees when executed on flatbed.

024

The device executes copy job as only mono even though color copy is started.

025

confidential

026

The device maintains HDD encryption as a default.

031

The device shall store confidential/store print without image processing.

032

The device shall print line even though that has less than 1 dot.

Copyright© 1995-2013 SAMSUNG. All rights reserved.

4-70

«
...
319
320
321
322
323
...
»

Summary of Contents for SL-X7600GX










































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SL-X7600GX

Brand: Olivetti Pages: 211

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands