Samsung SL-X7600GX Service Manual Download

Page: 328 / 521

4. Troubleshooting

► Error Code

A1–1111

A1–1113

► Error message

Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists.

Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists.

► Symptom

Feed/MP motor operation is abnormal.

► Troubleshooting method

•

A1–1111 : Feed/MP motor is stopped but machine recognizes it as operational.

•

A1–1113 : Feed/MP motor is operating but machine recognizes status as "Stopped".

1) Turn the machine off then on. If the error persists, check the following.

2) Open the side cover. Check if there are any foreign substances or paper around Feed/MP unit.

3) Remove the rear cover.

4) Check the connection between the motor and main board.

5) If the connection is OK, enter SVC mode. Execute the motor test.

(Diagnostics > Engine Diagnostics > Engine Test Routines)

a) If the motor is not operational,

i) Check the motor signal(3.3V). If the signal is abnormal, replace the main board.

(

Refer to 3.3.7 Main board

)

ii) Check the power(24V). If the power is abnormal, check the SMPS board. If the SMPS board is defective,

replace it.

(

Refer to 3.3.9 SMPS board 1 and 2

)

iii) If the motor signal and power is normal, replace the Feed/MP motor.

(

Refer to 3.3.18 Feed_MP Drive Unit

)

b) If the motor is operational, replace the main board.

4-77

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands