Samsung SL-X7600GX Service Manual Download

Page: 376 / 521

4. Troubleshooting

► Error Code

C8–4130

► Error message

Replace with new cyan developer unit

► Symptom

The life of the cyan developer unit expires has expired.

► Troubleshooting method

1) Turn the machine off.

2) Replace the cyan developer unit.

3) Turn the machine on then print the test page.

► Error Code

C8–4210

C8–4310

C8–4313

► Error message

Cyan Developer Failure: #C8-4210. Turn off then on

Cyan Developer Failure: #C8-4310. Install cyan developer unit again

Cyan Developer Failure: #C8-4313. Turn off then on. Please call for service if the problem persists

► Symptom

The cyan developer unit has a problem with toner supply or sensor calibration.

► Troubleshooting method

1) Open the front cover. Then, remove the waste toner container.

2) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.)

3) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed.

4) Install the waste toner container. Close the front cover.

5) Turn the machine off then on.

6) If the problem persists, remove and reinstall the cyan developer unit.

7) If the problem persists, replace the cyan developer unit.

4-125

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands