Samsung SL-X7600GX Service Manual Download

Page: 450 / 521

4. Troubleshooting

► Error Code

U2–2113 / U2–3114 / U2–4113 / U2–5113

► Error message

Yellow LSU Failure: #U2-2113. Turn off then on

Magenta LSU Failure: #U2-3114. Turn off then on

Cyan LSU Failure: #U2-4113. Turn off then on

Black LSU Failure: #U2-5113. Please turn off then on

► Symptom

Hsync signal of the LSU is abnormal.

► Troubleshooting method

CAUTION

Before unplugging the LSU harness, the machine must be turned off and power cord must be removed.

1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up.

2) Print a demo page to check that the machine operates normally.

3) If the problem persists, check the following :

a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Print a demo page to

check that the machine operates normally.

b) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable on main board. Print a

demo page to check that the machine operates normally.

c) If the LSU cable is defective, replace it. Check that the LSU motor makes a sound after turning the machine on.

d) If the problem persists, replace the LSU.

4-199

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands