Samsung SL-X7600GX Service Manual Download

Page: 480 / 521

4. Troubleshooting

4.7.12. Poor fusing performance

A. Typical faulty images

B. Troubleshooting procedure

Step

Cause

Action

Check the paper type.

Depending on what type of paper used, print speed
varies.

(ex)

•

Plain (71~90g/), Thick (91~105g/) : Full Speed

•

Heavy weight (106~175g/) : Half Speed

•

Envelope (75~90 g/), Label (120~150 g/) : Half
Speed

Check the paper type on control panel is same as paper
user uses.

(Refer to 2.2.7.)

The fuser unit is worn out.

Replace the fuser unit.

Check if the surface of the fuser belt & pressure roller
is scratched.

Replace the fuser unit.

Check if the temperature control system has problems.

•

Thermistor is broken or operates abnormally

•

Halogen lamp is broken or operates abnormally.

Check the Non-contact thermistor sensor.

Check the Halogen lamp.

(Refer to 4.5.7. U1–2113)

If you find some problems, replace the broken parts or
Fuser unit.

Check if the pressure control system operates properly.

Check the pressure control system.

(Refer to 4.5.7. U1–2115)

The problem persists, replace Fuser unit.

Paper is wrapped on the Heating roller.

Remove a wrapped paper and print the demo page.

If there are some problems on the printout, replace Fuser
unit.

4-229

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands