Samsung SL-X7600GX Service Manual Download

Page: 482 / 521

4. Troubleshooting

4.7.14. Setting Standard Tone

1. Setting Standard Tone

•

To adjust the color tone to the standard set by factory.

NOTE

▪

After first machine installation, this functions must be executed.

▪

After replacing the ITB unit or cleaning the CTD sensor, executing this function is recommended.

•

1) Load A4 or Letter with SEF (Short Edge Feeding) direction on tray.

2) Select [Setting] on main UI.

3) Log in as Admin.

4) Select [Adjustment] -> [Tone Adjustment] -> [Setting Standard Tone].

5) Select ”OK” on confirmation window.

6) The scan ID chart will be printed out.

7) Load the chart on platen glass. (Horizontal direction)

8) Start scan.

9) When the scan complete window appears, select “OK”.

4-231

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands