4. Troubleshooting
2. Cancel Setting Standard Tone
NOTE
When the machine is installed for the first time, “Cancel Setting Standard Tone” does not need to be executed.
•
<Purpose>
-
To cancel the setting standard tone.
-
To return the customized tone by user after setting the standard tone.
•
<Procedure>
1) Select [Adjustment] -> [Tone Adjustment] -> [Cancel Setting Standard Tone].
2) When the cancel setting standard toner will be appeared, select “OK”.
3) Select “FullTRC” : [Adjustment] -> [Tone Adjustment] -> [Auto Tone Adjustment] -> *Full + Execute Now
3. Error message
•
<Scan Image Fail>
-
When there is any problem on the scanned ID chart, error message will be appeared.
•
<Check items>
-
Check if the scanned ID chart is placed.
-
Check if the chart direction is horizontal.
-
Re-try the setting standard tone procedure.
4. In case of need
•
When installing the machine for the first time.
•
When the brightness is changed in comparison to previous image.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4-232
