Samsung SL-X7600GX Service Manual Download

Page: 495 / 521

4. Troubleshooting

2) Machine can not feed the paper.

•

Symptom

: The machine can not feed the paper from Tray1 or Tray2.

•

Cause

Feed motor problem

Feed motor connection problem

Main board defect

•

Troubleshooting

1) Check the Feed motor operation.

a) Open the side cover, and push the cover switch with paper forcibly.

b) Enter the service mode.

c) Select the menu below.

(EDC Mode > Diagnostics > Engine Diagnostics > Engine Test Routine > Feed motor > on/off )

Check the two feed rollers operating status.

d) If the feed rollers can not rotate, open the rear cover and check the motor and gears.

2) Check the connection between the main board and feed motor.

3) If the problem persists, replace the main board.

3) Envelope wrinkle

•

Symptom

Envelope is wrinkled when printing from MP tray.

•

Troubleshooting

1) Enter SVC mode.

2) Select “Envelope Rotate”. (

Service Functions > Envelope Rotate

)

3) Select one menu among ‘off’, ‘90 degree’, ‘180 degree.

(

Refer to 4.5.6.18. Envelope Rotate

)

4-244

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands