Samsung SL-X7600GX Service Manual Download

Page: 132 / 521

2. Product Specifications and Description

2.12.7. Eraser PBA

Eraser PBA has one LED. This LED is used for erasing the negative charges on the surface of the drum after printing.

•

Information

•

Part Code : JC92–02244A

•

Part Name : PBA-ERASER

2.12.8. Fuser PBA

The Fuser PBA includes CRU memory for Fuser Unit Life Cycle counting. It also provides a connection interface for
the pressure sensor.

•

Connection

Fuser EEPROM, Pressure Sensor I/F

Pressure Sensor (Not used)

•

Information

Part Code : JC92–02470A

Part Name : PBA-FUSER

2.12.9. Waste Sensor PBA

The Waste Sensor PBA detects the waste toner level inside the waste toner container.

•

Information

•

Part Code : JC92–02471A

•

Part Name : WASTE SENSOR RX

2-116

Summary of Contents for SL-X7600GX























































































































































































































































































































































































































































































































Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands

Samsung SL-X7600GX, Service Manual

Search results

Summary of Contents for SL-X7600GX

Reviews:

Related manuals for SL-X7600GX

Brands by name

Popular brands