3. Disassembly and Reassembly
3. Disassembly and Reassembly
3.1. Precautions when replacing parts
3.1.1. Precautions when assembling and disassembling
•
Use only approved Samsung spare parts. Ensure that part number, product name, any voltage, current or temperature
rating are correct. Failure to do so could result in damage to the machine, circuit overload, fire or electric shock.
•
Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and
create electric shock or fire hazards.
•
Take care when dismantling the unit to note where each screw goes. There are 19 different screws. Use of the wrong
screw could lead to system failure, short circuit or electric shock.
•
Do not disassemble the LSU unit. Once it is disassembled dust is admitted to the mirror chamber and will seriously
degrade print quality. There are no serviceable parts inside.
•
Regularly check the condition of the power cord, plug and socket. Bad contacts could lead to overheating and fire.
Damaged cables could lead to electric shock or unit malfunction.
3.1.2. Precautions when handling PBA
Static electricity can damage a PBA, always used approved anti-static precautions when handling or storing a PBA.
•
Precautions when moving and storing PBA
1) Please keep PBA in a conductive case, anti-static bag, or wrapped in aluminum foil.
2) Do not store a PBA where it is exposed to direct sunlight.
•
Precautions when replacing PBA
1) Disconnect power connectors first, before disconnecting other cables.
2) Do not touch any soldered connections, connector terminals or other electronic parts when handling insulated parts.
•
Precautions when checking PBA
1) Before touching a PBA, please touch other grounded areas of the chassis to discharge any static electrical charge
on the body.
2) Take care not to touch the PBA with your bare hands or metal objects as you could create a short circuit or get an
electric shock. Take extra care when handling PBAs with moving parts fitted such as sensors, motors or lamps as
they may get hot.
3) Take care when fitting, or removing, screws. Look out for hidden screws. Always ensure that the correct screw is
used and always ensure that when toothed washers are removed they are refitted in their original positions.
3-1
Copyright© 1995-2013 SAMSUNG. All rights reserved.
