Appendix A Outdoor GPS Antenna Installation
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0
107
Copyright © 2019, All Rights Reserved.
Installing Optional GPS Arrestor
Fixing GPS Bulkhead
The method to fix the GPS bulkhead is as follows.
Table 31. Optional GPS Bulkhead Fixing Parts and Tools
Classification
Description
Installation position
•
An arrestor must be installed within the lightning rod protection angle.
•
The arrestor must be installed to prevent a person or system being affected by
lightning induced currents.
Parts
•
Bulkhead
•
Bakelite
1 EA
1 EA
Fastener
M6 anchor bolt assembly
•
M6 anchor bolt
•
M6 hex. nut
•
M6 spring washer
•
M6 plane washer
2 sets
1 EA/set
1 EA/set
1 EA/set
1 EA/set
M6 insulation bushing
2 EA
Recommended
torque value
M6 hex. nut
2.41~3.61 ft.lb.
(33.28~49.92 kgf.cm)
Working tools
Drill, hammer, torque wrench, and level