ENGLISH
5
Upgrading the Firmware Flash Memory
Your COMBO Drive
4
1. Connector for stereo headphones with a 3.6 mm stereo mini-jack
2. Headphone volume control
3. Disc compartment (the compartment opens and closes automatically
when you press the Eject button)
4. Emergency eject hole (if the compartment does not open when
you press the Eject button, power off the computer, insert a pin or
unfolded paper clip in the hole and push firmly)
5. Indicator light
6. Eject button
The product firmware can be upgraded by downloading the updated file from the
following Web site:
http:// www.samsung-ODD.com/odd
www.samsungelectronics.com
System Requirements
Before you install the COMBO drive, we strongly recommend that you check that
your setup meets the system requirements listed below.
Item
Description
Computer
Intel Pentium II 300MHz/Celeron 333A(or higher),
32 MB of RAM (or higher) with an IDE interface
Free expansion unit
5.25 inch
Disk space
700 MB minimum
Windows version
Windows 98/2000/ME/XP/NT4.0 (or higher)
(For Windows NT, we recommend Service Pack2,
and Version is over 4.00.1381)
MS-DOS
5.0 or higher (For MS-DOS, The CD-R/CD-RW driver
can only read a disc without premaster Software.)
DVD Video playback
PC with Windows 98/2000/ME/XP/NT4.0
DVD-Video playback software and appropriate
hardware (the Power DVD MPEG software is
included in the COMBO drive package)
1. Two-pin digital audio output terminal for use with a sound or MPEG card
supporting digital audio features
2. Four-pin sound output terminal for use with a sound card
(refer to the sound card documentation for further details)
3. Master/slave select terminal
4. 40pin host E-IDE interface connector
5. 4pin power terminal
1
2
3
4 5 6
1
2
3
4
5
DVD Region Protection Coding (RPC):
The RPC feature is supported on DVD players and is used with DVD-video discs
(such as movies). Currently, the motion picture industry has divided the world into
different regions or zones that correspond to the regional markets into which the
motion picture industry releases movies. Simply put, RPC codes are placed on movies
marketed throughout the world, based on the region of the world in which they are
being sold. These RPC codes help control and prevent pirating of new movies into
other motion picture regions prior to their true release dates within those markets.
The SM-348 COMBO drive supports RPC phase II. In the RPC-2 mode, the local
code can be changed by users.
RPC-2 is selected by default for the SM-348 COMBO drive.
You can change the region code up to five times via an MPEG application.
Please contact your dealer or local SAMSUNG representative if you wish to change
the local code more than five times.
