Samsung SM-408, User Manual

Setting Up the Device Driver

9

◆

Automatic Setup

1

Insert the setup diskette in the diskette drive and change the directory to A:,
where A: is the diskette drive.

To do so, type A: after the C:\ prompt and press [Enter].

2

Type CDSETUP and press [Enter].

3

Reboot the computer.

◆

Manual Setup

LAST DRIVE = Z
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
DEVICE = C :\SAMSUNG\SSCDROM.SYS  /D : SSCD000  /V

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

C :\SAMSUNG\MSCDEX  /D:SSCD000

Installing the CD Record Utility 

8

To record data on a CD-R or CD-RW disc in the COMBO drive, you must
first install the CD record utility. For compatibility reasons, you are
recommended to uninstall any existing software of the same type before
installing this utility.

1

Insert the disc supplied with the COMBO drive in the drive.

2

Follow the instructions displayed on the screen to install the utility.

Refer to the separate utility documentation for further details.

3

Store the utility disc in a safe place.

The SAMSUNG device driver enables discs in the COMBO drive to be read but
not recorded in an MS-DOS environment; the driver is located in the D driver
folder on the CD record utility disc.

You do not need to install an additional device driver for
Windows 95/98/2000/ME, Windows NT4.0, as the default Windows device
driver is used.

Installing the Device Driver  

1

Make the C:\SAMSUNG directory.

2

Copy the files from the diskette to the C:\SAMSUNG directory.

To do so, type COPY A:

*.*

C:\SAMSUNG after the C:\ prompt and press

[Enter].

3

Edit the CONFIG.SYS file.
Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000 /V entry.

4

Edit the AUTOEXEC.BAT file.
Add the C:\SAMSUNG\MSCDEX /D:SSCD000 entry.

5

Reboot the computer.