Appendix
148
A Bluetooth connection is not established or your Galaxy Watch and
the mobile device are disconnected
•
Ensure that the Bluetooth feature on both devices is activated.
•
Ensure there are no obstacles, such as walls or electrical equipment, between the devices.
•
Ensure that the latest version of the Galaxy Wearable app is installed on the mobile
device.
•
Ensure that your Galaxy Watch and the other Bluetooth device are within the Bluetooth
connection range (10 m). The distance may vary depending on the environment the
devices are used in.
•
Restart both devices and launch the Galaxy Wearable app on the mobile device again.
Calls are not connected
•
Ensure that your Galaxy Watch is connected to a mobile device via Bluetooth. If your
Galaxy Watch is connected to your mobile device remotely, you cannot receive incoming
calls.
•
Ensure that your mobile device and Galaxy Watch have accessed the right cellular
network.
•
Ensure that you have not set call barring for the incoming phone number on the mobile
device and Galaxy Watch.
•
Ensure that you have not set call barring for the phone number you are dialing on the
mobile device and Galaxy Watch.
•
Check whether do not disturb mode, goodnight mode, or theatre mode is activated.
If one of these modes has been activated, the touchscreen does not turn on during
incoming calls. Rotate the bezel or press the Home key or Back key to turn on the screen
and check the incoming call.
Others cannot hear you speaking on a call
•
Ensure that you are not covering the built-in microphone.
•
Ensure that the microphone is close to your mouth.
•
If using a Bluetooth headset, ensure that it is properly connected.