Getting Started 9
Turning Your Device On and Off
Turning Your Device On
Press and hold the
Power/Lock
Key
.
For more information, refer to
Note
: Your device’s internal
antenna is located along the
top back of the device. Do
not block the antenna; doing
so may affect signal quality
and may cause the device to
operate at a higher power
level than is necessary. For
more information, refer to
Turning Your Device Off
1.
Press and hold the
Power/Lock
Key
.
2.
At the
Device options
prompt, touch
Power off
.
3.
At the
Power off
prompt, touch
OK
.
Setting Up Your Device
When you first turn on your device, you are asked to set up
a few things. To do that, the following screens display.
Some screens can be skipped (touch
Skip
) or re-displayed
(touch
Back
). Some screens display depending on the
options you choose.
Let’s Set Up Your Device
Use this screen to quickly and easily set up email accounts,
import contacts, and configure Wi-Fi.
1.
Touch
Español
, if desired. English is the default.
2.
Touch
Terms & Conditions
, read the End User License
Agreement for Ready2Go, then touch
next
to begin.