Settings
63
•
Save
: Save the changes and restart the device.
•
Exit
: Restart the device without saving the changes.
Setup menus
•
SysInfo
: View the basic specifications of the device.
•
Advanced
: Configure the advanced settings and perform the battery calibration.
•
Security
: Configure security functions.
•
Boot
: Configure boot-related settings.
Setting the boot password
Setting a password with the BIOS enhances protection against viruses and hacking attacks.
On the BIOS screen, tap
Security
.
The following password settings are available:
•
Supervisor Password
: This password is required when turning on the device or entering
the BIOS screen. This password allows you to enter the BIOS screen as an administrator.
You can change the BIOS settings.
•
User Password
: This password is required when turning on the device or entering the
BIOS screen. This password allows you to enter the BIOS screen as a user. You cannot
change the BIOS settings. The password will be deactivated automatically if the
supervisor password is removed.
•
HDD Password
: This password is required to access the hard disk drive (HDD) from the
device. This password may not be supported depending on the model.
Do not forget your password or expose it to others.
•
If you forget your supervisor password or HDD password, contact a Samsung
Service Centre.
•
If you forget your user password, you can remove it by removing the supervisor
password.